Simpson Titen HD Anchors

While you have many options for fastening racks and other fixtures to concrete and block, but have you tried the Simpson Strongtie Titen HD Anchor?    The Titen HD anchor is a concrete screw anchor that is easy to install and leaves you with a nice finished hex head.  The anchor is also removable making it perfect for temporary installs or future moves.

Installing The Simpson Strongtie Titen HD Anchor
Installation of the anchor is simple.  Drill a hole the same diameter as the anchor, so for a 3/8″, drill a 3/8″ hole about an inch deeper than intended installation clean the  hole and install.   The Titen HD has are real advantage over some of the competitive anchors that use special bits or even strange hard to find fractional bits.  Everyone has a 3/8″ or 1/2″ hammer drill bit, but 7/16″ or 9/16″, not so likely.  A cordless impact driver makes quick work of driving in the anchor.

Simpson Strongtie Titen HD anchors are available in diameters from 1/4″ to 3/4″  in a variety of lengths.  The standard finish is zinc which works well for most interior work but you can find mechanically galvanized and even stainless steel for more demanding environment.

Check out the video below to see how fast and easy the Simpson Strongtie Titen Anchor installs.  Available online at ConstructionFastening.Net

 

Bookmark the permalink.

Comments are closed.