Ramset Trakfast and T3 tools are know for shaving time off the job. Sometimes though even what should normally be a quick job can get 30 minutes added to it simply because of tired batteries. Most nicad batteries only get so many cycles (charge and run) before they will start to loose capacity. If your batteries are not holding a charge very long any more or if you have been limping along on just one or two batteries, adding a new one can really cut down on frustration and save you real time. Choosing the correct battery for your Ramset Trakfast tools is fairly simple. The original Ramset Trakfast tool, the TF1000 and the TF1200 use a cylndrical battery as shown at the far left in image above. Part number on the battery is 7505012. If you have the latest version of the Trakfast the TF1200 your battery is the newer version (shown in the center abvoe) that clicks into the tool, part number is B0092. This in my opinion was a huge upgrade for the Trakfast line as the TF1100 tools were known for problems with the battery connections. This click in style battery solved the problem. This same battery, B0092 is used in the Ramset T3Mag and the T3SS tools as well.
Another real improvement from the very first gas tools offered by Ramset is the charger. The original chargers were always suspect to the batteries not settling in properly for a good connection. The new charger, part # B0022 is a dual bay charger and works with the original Trafkast tool batteries along with newer style batteries used by the TF1200, T3Mag and T3SS. Such a simple idea adds so much to the usefulness of the tool!
So there you have it, a little basic info on batteries and chargers for the Ramset Trakfast and T3 tools. You can find batteries and chargers for these tools along with pins fuel cells and parts online at ConstructionFastening.Net or give us a call toll free at 1-877-212-2377.