Long SDS MAX Hammer Drill Bits For Hilti, Bosch, Milwaukee & Other Tools

extra length sds max bitsExtra long bits to fit SDS MAX rotary hammers can be hard to find, but many times are real necessity on the job.  Less common than the smaller SDS rotary hammers, SDS MAX rotary hammers are often used where larger holes are drilled on a routine basis.  SDS MAX rotary hammers are available from Hilti, Bosch, Milwaukee, DeWalt, Makita and others.  FYI, Hilti calls their bit a TEY bit but SDS MAX bits are totally interchangeable, so if you have a larger Hilti tool it takes an SDS MAX.  Long length SDS MAX bits are available in diameters starting at 1/2″ up to 1-3/8″ that will drill up to 31″ holes.  Many times in existing facilities like hospitals, schools and many older buildings, you will run into an application where you simply will need one of these longer length SDS MAX bits to get through the wall or floor.  Smaller hammers handle bits up to 3/4″ that will drill 31″ but after that, there simply is too much resistance for these smaller hammers to handle.  At that point, the SDS MAX Rotary hammer will fit the bill.  If you are not sure what type of shank you hammer drill takes, give us a call 1-877-212-2377 we will help you out.  Keep in mind that in addition to the longer length SDS MAX bits, we also have a complete line of SDS MAX core bits when you need holes up to 6″ in diamter.


Ramset Cobra Plus Parts

Ramset Cobra Plus PartsWhile the Ramset Cobra Plus tool shares many parts with the Ramset Cobra (the standard Cobra tool is a clone tool, based on the tried and true Hilti DX-350 design) many parts differ.  Click here for the schematic and available parts for you Ramset Cobra Plus Tool. Not sure which tool you have?  The easiest way to tell the difference between the Cobra Plus and the Cobra is the power adjustment feature.  The Ramset Cobra Plus has a power adjustment feature and is commonly found in big box stores.  Most industrial tool suppliers favor the standard Cobra tool as it proves to be more durable than the Plus and parts are more readily available.  As mentioned earlier, the Cobra Plus does share many parts but  the entire front end of the tool and obviously the power adjustment parts are different.  While not all replacement parts are available some of the most common parts for the Cobra Plus like the piston and the fastener guide are stock items for us.

In addition to replacement parts for the tool, we offer an extension pole for the tool, allowing you to suspend ceiling grid wire and more from the floor.  We also offer a full line of power loads and pins for the tool.  Learn more at ConstructionFastening.Net